Energy Recovery
The heated pool hall air contains Sensible heat, that which raised its temperature, likewise the humidity contains all the Latent heat of vaporisation, the energy which evaporated the moisture from the pool (cooling the pool in the process). The only way to reclaim all this Sensible & Latent energy and recycle into back into the pool air and/or pool water thereby minimising fuel burn, is to pass the pool air/moisture mix through a Heat Pump Dehumidifier. This process dries the air, extracts the energy and replaces this recovered heat energy into the pool air and/or water as determined by the Total Control System.
Maintaing Pool Air Quality
In order to maintain a comfortable atmosphere in the pool hall, it is desirable to allow a limited quantity of fresh air be brought in by the unit, whilst at the same time a similar quantity of used air is exhausted.
Total System Control
As with any essential machine, a fully integrated control system is required comprising:
- Both Air & Pool water temperature setting and indication.
- Variable Air humidity setting and monitoring.
- Inbuilt time clock to lower the pool hall temperature at set times when the pool cover is in place, saving energy when the pool is not in use.
- Remote control panel operating at low voltage and with easily variable lead length up to 30metre
- Pilot lights for Power ON, Defrost, Dehumidification, Air heating and Water Heating.
- A power ON switch, and, on fresh air equipped units, a fresh air "OFF/AUTO" switch and "AUTO" fresh air pilot light.
All in the VariHeat Series3
|
Swimming Pool Environmental Control
