| 34
range Hot Water Heat Pumps
These units are floor standing machines requiring
a three phase electrical supply, and are ideally suited
to hot water production up to 70ºC. They may also be
considered for larger heat recovery for space cooling or
heat recovery for hot water production applications. These
units incorporate a centrifugal fan which allows the units
to be ducted. This enables the units to be installed within
a plant room where the cold air that is produced can be
used for space cooling or simply ducted to outside.
For hot water production, units are usually installed outside,
directly re-circulating atmospheric air. Alternatively,
they may be installed in a plant room using the machine’s
powerful internal fan and a short ductwork system, or in
a well ventilated plant room and discharging through a wall
to the outside.
For heat recovery, the units are normally sited within the
area to be cooled, on a firm level concrete base, but they
can be positioned in an adjacent area by using the machine’s
powerful internal fan and a ductwork system.
Features
The range consists of 5 floor standing models, with the
following features:
- Heating capacities from 6kW to 65kW
- Environmentally friendly R134A refrigerant
- Hot water production up to 70°C
- Option of operation down to -15°C (3034 & 7034
only) with reverse cycle defrost
- Fully weatherproof polyester coated cabinet
- Top or rear discharge options (3034 & 7034 only)
- Cu/Ni heat exchangers can be used with potable water
|
Swimming
Pool Environmental Control
