|
Hot Water Heat Pumps
These units are floor standing machines requiring a three phase electrical supply, and are ideally suited to hot water production particularly in warm climates. They may also be considered for larger heat recovery for space cooling or heat recovery for hot water production applications.
For hot water production, units are usually installed outside, directly re-circulating atmospheric air. Alternatively, they may be installed in a plant room using the machine’s powerful internal fan and a short ductwork system, or in a well ventilated plant room and discharging through a wall to the outside.
For heat recovery, the units are normally sited within the area to be cooled, on a firm level concrete base, but they can be positioned in an adjacent area by using the machine’s powerful internal fan and a ductwork system.
Features
The range consists of 5 floor standing models, with the following features:
- Heating capacities from 6kW to 65kW
- Environmentally friendly R134A refrigerant
- Hot water production up to 70°C
- Option of operation down to -15°C (3034 & 7034 only) with reverse cycle defrost
- Fully weatherproof polyester coated cabinet
- Top or rear discharge options (3034 & 7034 only)
- Cu/Ni heat exchangers can be used with potable water
|
